OSK – Genus

Omega System Kit for Genus

WARNING: All information listed below is tentative/unofficial as the Mesh Listed is still in early access/beta.
We offer no warren tee or guarantee that it will be released/updated or that this information will not change on full release. (Or that there will be a release at all)

The Details: 

  • Creator Info:
    • MP: Coming Soon?
    • Facebook: https://www.facebook.com/freezy92
    • Facebook: https://www.facebook.com/profile.php?id=100004352386855
    • Flickr: https://www.flickr.com/groups/genesislab/
    • Inworld Group: secondlife:///app/group/b153906f-38dd-0dd6-d327-345bef9f446e/about
  • Plug-In: This mesh needs an easy to use Activator.
  • Permissions: Copy/No-Modify/No-Trans
  • Omega Advanced and Evolved Features:
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
    • Stand-Alone Materials: This kit DOES support Stand Alone Materials.
    • Asymmetrical Eye Appliers: This kit DOES support Asymmetrical Eye Appliers.
  • Head and Makeup Layers:
    • Type M Partial Head : Multiple Makeup Layers, split into 3+ texture zones
      • 4 Partial Makeup Layers
      • 1 Full Head Makeup Layer
      • Makeup Layers are attached.
      • Makeup Layers cover the whole head.
    • Eyelashes
      • Supports Omega Eyelashes
  • Mesh Type:  Bento: This item works with the Bento update and requires a Bento friendly viewer to view properly.
  • See what people are saying about it:

Omega Kit Instructions:

 

Installation

Step One: Get an Update of your Genus Head.
Step Two: Wear your Genus Head.
Step Three:  Attach the “Omega System Installer – Genus”
Step Four: Click the installer, and verify each piece of the mesh thanks you in local.

Your mesh will now respond to Omega Appliers!

Next Steps

Thats it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System



FAQ

Is there a Neck Blender?
There is an Omega Friendly Neck Blender.

Does it come with Eyes?
There are Omega Friendly eyes included.

Is there a Demo?
Yes!
http://maps.secondlife.com/secondlife/Genus%20Project/138/160/24

Where can I get it?
http://maps.secondlife.com/secondlife/Genus%20Project/138/160/24

How Much is the Mesh? 
3000L for early access
5500L once the head is released.

How Much is the Kit?
149L on MP, 99L Inworld

It’s not working! T.T
Check out our handy troubleshooting tips:

Basic Trouble Shooting

Basic Trouble Shooting!

If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!

Things to Try when appliers aren’t working:

  1. Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
  2. Attach the Relay or Installer that came with your Omega Kit.
    1. The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
    2. If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
    3. If it’s a relay, keep it attached.
  3. Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
  4. Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
  5. Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
  6. Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it.  The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]

I still need help with this mesh/kit!

If your issue is Omega Related:

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
  • If you don’t find help there, contact our CSR: FreyasFashions Resident OR Fill out a Support Ticket

If your issue is NOT Omega Related, try the following:

  • Genus Inworld Support Group: secondlife:///app/group/b153906f-38dd-0dd6-d327-345bef9f446e/about
  • Contact Genus via Notecard:  secondlife:///app/agent/65a4dec4-4950-4b90-b568-066eb8bb07fb/about
  • Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
  • The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.

;

 

24 thoughts on “OSK – Genus

  1. It seems like second life isn’t beginner friendly. I am new and would love to get into second life. I’ve tried to understand and follow the video and instructions on cards but still get lost.

    • That\\\\\\\\\\\\\\\’s part of the fun of SL though. So when you get in world you find someone as lost as you are to help stumble through the learning curve together. Take your time, read some blogs by other more experienced users to find out the latest and greatest in fashion, roleplay, events, fairs, avatar mesh components (like the head you see here), make more friends and chat. My best friends are ppl I\\\\\\\\\\\\\\\’ve never met in real life and the same ppl that I am still stumbling through 11 years later.

  2. I have an issue with mine and the applier ain’t working at all I tried the redelivery, that didn’t work so what do I need to do it to get it active again?

  3. Anyone else getting this annoying message from the Genus head when you change or log on? Why on earth would they spam their own customers like that? It makes me want to buy another brand head.

    • Oh yes, LLB! I agree with you! I came to this page to ask exactly that. There should be a way to turn off that ANNOYING and useless message. I hope they make it disappear in a future update. Can’t bear it anymore! LOL!! xD

    • This Spam every time you log in is now getting to me now and its so annoying and I think if I cant stop it I will change my head to another make/creator. Until the spamming is stopped I would not recommend GENUS to anyone.

  4. Regarding the spam at logon: You may just block the objects sending the spam (right click on the green object names in chat ( e.g. ” GENUS Project – Genus Head – Strong Face GIFT001 – v1.7 – Mocap”) and choose “Block …”.

  5. Hi people,

    I have a problem with the Omega Genus.
    When i put on my body i have a message “Attempting to Activate Genus” i don’t know why because because above all work well.

    Could someone help me to solve this problem please ? Thanks!

  6. I have tried to block the spamming ie, ” GENUS Project – Genus Head – Strong Face GIFT001 – v1.7 – Mocap”) and choose “Block …”.
    but it does not stop it . Come on Genus sort this out please

  7. oi alguem pode ajudar?
    Como você resolveu esse problema ? “Script tentando assumir os controles do proprietário, mas a permissão PERMISSION_TAKE_CONTROLS não foi definida!”
    nada funciona no HUD

  8. I recently bought a tattoo and there are several Omega appliers in the tat hud but I dont know how to use tht with the body I have. Any suggestions would be greatly appreciated thanks. Also where is the Omega applier hud? Does the Lucy Body come with it or no?

Leave a Reply

Your email address will not be published. Required fields are marked *