Omega System Makeup and Routing Info – Type D Heads

Omega System Makeup and Routing Info – Type D Heads

This is the instructions for the Omega System Makeup Routing HUD and Makeup appliers with your mesh heads and other items that support Makeup Appliers. Not sure what sort of head you have? Find your head on the Supported Meshes List and check out the page for your particular mesh.   If you’re a Mesh Maker and need to know what type of head yours is, Click Here.

Makeup Info for Type D Mesh Heads

Well… this is going to be short.  These heads have no makeup layers. Look for skins with makeup baked into them! There is one feature of the routing HUD you should be aware of though:

Other Uses for the Router:

The routers not just for makeup!

Installer Storage

In addition to handling Makeup Appliers, the Routing HUD also serves as a storage System for the Installers you use.  This can be handy if you have alot of different Omega Friendly Bits. To use, simple keep your Router worn whenever you Install Omega into new Meshes. Then.. the next time you need to re-install Omega, either because you got an update, or opened a fresh Mesh, or had to hit the debug button on the router menu, you can use the “Install” button in the Settings Menu and the router will install all the Meshes it remembers. 🙂

Phat Azz Applier Forwarding
It took us 2 years to get ahold of the man, but we finally did. We finally have the Channels, and most importantly the Permission from CK Winx himself to use them.  If you wear the Router and use a Phat Azz applier, it will apply to any mesh with Omega Installed. 🙂

And before you ask, no I will not do the same for <insert brand of applier here>.  We only use Channels that we have permission to use, and only in the way we’ve been granted permission to use them.  Do not pester Mesh Makers asking them to give me permission either. It’s not in their best interest to do so. Phat Azz is a unique case in that the Mesh is off the Market.