OSK – Signature Mesh

Instructions – Signature Mesh

The Details: 

Note: Information is for current meshes. For information about the Discontinued Anthony and Franklin, scroll down to the spoiler.

  • Creator Info:
  • Permissions: Copy/No-Modify/No-Trans
  • Mesh Type:  Fitmesh: This item is a fitmesh item and requires a fitmesh friendly viewer to view properly.
  • Pre-Installed: This Mesh Comes with Omega Built-in!
    • Supports Omega Eyelashes
    • No Eyelashes
    • Has Proprietary Eyelashes
  • Materials and Tinting
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
    • Stand-Alone Materials: This kit DOES support Stand Alone Materials.
    • Asymmetrical Appliers: This kit DOES support Asymmetrical Arm Appliers.
    • Asymmetrical Eye Appliers: This kit DOES support Asymmetrical Eye Appliers.
    • RLV Support: This kit DOES have RLV Integration.
  • Skin: Skin is Omega Friendly
  • Clothing Layers
    • 3 Clothing Layer(s)
    • Clothing Layers are attached and Omega Friendly
  • Nipples: Nipples are not separate.
  • Hands and Feet:
    • Type A Hands & Feet: Separated Toes, Physical Nails
    • Hands and Feet are Included as their own attachment.
    • Clothing Layers go over the hands and Feet
    • Does not fit Slink Hands
    • Alice: fits Slink Foot Size L (see demo)
    • Hands are Bento
  • Head and Neck
    • Omega Friendly Neckblender included
    • Head Not Included/Sold Separately.
  • Head and Makeup Layers (Sold Separately – Gianni/Geralt Only):
    • Type C Head: Multiple Overlapping Makeup Layers
    • 5 Makeup Zones(s)
    • Makeup Layers are attached.
    • Makeup Layers cover almost the whole head.
    • The Ears are not covered by Makeup Layers.
    • Mesh Type:  Bento
  • Read what others are saying!

Omega Kit Instructions:

Congratulations, you’re the owner of a mesh with a Pre-Installed Omega Kit.
That means there’s literally nothing you have to do to make it accept Omega and Tango appliers. It already does that.

Makeup Appliers

You can just use the Tattoo button to apply to the whole head… but who wants to do that? For instructions on how to use the Routing HUD for Mixing and matching your makeups, click here:

Omega System Makeup and Routing Info

Next Steps

Now what? Getting Started with Omega: Huds, Shopping and Applier Conversion
Thats it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System

Anthony and Franklin (Discontinued)

Note: This mesh has been discontinued. The following information is for archive purposes only.

  • Plugin: Being a no mod mesh, a drop in script was not possible. Instead, it uses a simple installer hud that you wear and click to install the kit into your mesh.
  • Skin: This body does NOT take Omega Skin appliers.
  • Clothing (Tattoo) Layers
    • 1 Omega Friendly Layer on the body. Extends over hands and feet.
    • Layer covers the face minus the beard.
    • Layer is attached
  • Hands and Feet
    • Type A Hands and Feet
    • Hands and Feet are hide-able, but not removable.
    • Does not fit standard sized hands and feet (ie, slink)
  • Head and Neck
  • Mesh Type:  Fitmesh: This item is a fitmesh item and requires a fitmesh friendly viewer to view properly.

Omega Kit Instructions:

Important: This kit was released April 2015. If you purchased your body before that date, go pick up a update from their store!
Important: This kit is ONLY for Anthony/Franklins Tattoo Layer, it has no effect on their non-SLUV skin!

Part One: Setting up your mesh

  1. Wear your Signature Male Mesh.
  2. Attach the “Omega System Installer – Signature Mesh”
  3. Click the installer, and verify the mesh thanks you in local.

Once this is done, your Mesh should respond to Omega clothing and face Appliers!

Next Steps

Now what? Getting Started with Omega: Huds, Shopping and Applier Conversion
Thats it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System



Is there a Neck Blender?
There is an Omega Friendly Neck Blender included with the bodies.
If you need one for the head that takes Omega Appliers, you can get one here:

Does it come with Eyes?
There are Omega Friendly eyes included.

The clothing applier isn’t working! And/or I don’t see it on my hands/feet!
99% of the time… you don’t have the clothing layer you’re trying to use turned on. Get out your Signature Body HUD and turn them on. Even if they appear to be on..turn them off and back on! (HUDs and Bodies aren’t always on the same page!)

The Skin isn’t applying!
If you are using the Anthony or Franklin Body, they do not accept Omega Skin appliers. It’s a whole different UV!

Any cool Omega add-ons I should know about?
Vista Animations has Bento Mesh Hands for Gianni!

Is there a Demo?

Where can I get it?

How Much is the Mesh?
Gianni/Geralt Heads: 3500L
Gianni/Geralt Bodys: 3500L
Alice Body: 3000L
Anthony/Franklin: 3000L This mesh has been discontinued.

Where Can I get the Kit?
Unless you have the Disconinued Anthony or Franklin, there’s No Need! It comes with Omega Built in!
If you DO have Anthony and/or Franklin:  https://marketplace.secondlife.com/p/Omega-System-Kit-Signature-Mesh/6988678

It’s not working! T.T
Check out our handy troubleshooting tips:

Basic Trouble Shooting

Basic Trouble Shooting!

If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!

Things to Try when appliers aren’t working:

  1. Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
  2. Attach the Relay or Installer that came with your Omega Kit.
    1. The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
    2. If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
    3. If it’s a relay, keep it attached.
  3. Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
  4. Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
  5. Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
  6. Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it.  The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.

I still need help with this mesh/kit!

If your issue is Omega Related:

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
  • If you don’t find help there, contact our CSR: FreyasFashions Resident OR Fill out a Support Ticket

If your issue is NOT Omega Related, try the following:

  • Signature Blog FAQ: https://www.signature-sl.fr/faq
  • Signature Inworld Support Group: secondlife:///app/group/23297ca0-f7fb-6835-9519-c01b7e9f7f83/about
  • Contact Signature via Notecard:  secondlife:///app/agent/027a8dbf-57b0-4ae8-a796-3926402128f4/about
  • Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
  • The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.

One thought on “OSK – Signature Mesh

Leave a Reply

Your email address will not be published. Required fields are marked *