Step One: Get an Update of your Caboodle Legs. Step Two: Wear your Caboodle Legs. Step Three: Attach the “Omega System Installer – Caboodle” Step Four: Click the installer, and verify each piece of the mesh thanks you in local.
It’s not working! T.T
Check out our handy troubleshooting tips:
Basic Trouble Shooting
Basic Trouble Shooting!
If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!
Things to Try when appliers aren’t working:
Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
Attach the Relay or Installer that came with your Omega Kit.
The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
If it’s a relay, keep it attached.
Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it. The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]
I still need help with this mesh/kit!
If your issue is Omega Related:
First, try The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
If your issue is NOT Omega Related, try the following:
Check their Inworld Support Group: secondlife:///app/group/eb1c4ddf-50e8-57f8-c0d9-3b4462fae415/about
Check the Creators Pics: secondlife:///app/agent/b1e789df-d948-4b49-a9a7-4d9fa0c9f5fc/about
Contact the Creator via Notecard: secondlife:///app/agent/b1e789df-d948-4b49-a9a7-4d9fa0c9f5fc8/about
Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about
Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem.
Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.
If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.
Congratulations, you’re the owner of a mesh with a Pre-Installed Omega Kit.
That means there’s literally nothing you have to do to make it accept Omega and Tango appliers. It already does that.
If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!
Things to Try when appliers aren’t working:
Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
Attach the Relay or Installer that came with your Omega Kit.
The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
If it’s a relay, keep it attached.
Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it. The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]
I still need help with this mesh/kit!
If your issue is Omega Related:
First, try The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
If your issue is NOT Omega Related, try the following:
Nookums Inworld Support Group: secondlife:///app/group/4cf0a12b-569c-e7e6-7817-538aa6464241/about
Check the Creators Pics: secondlife:///app/agent/4f380e0b-a720-4ba8-bacb-c50d8e696a30/about
Contact Nookums84 via Notecard: secondlife:///app/agent/4f380e0b-a720-4ba8-bacb-c50d8e696a30/about
Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about
Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem.
Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.
If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.
Congratulations, you’re the owner of a mesh with a Pre-Installed Omega Kit.
That means there’s literally nothing you have to do to make it accept Omega appliers. It already does that.
If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!
Things to Try when appliers aren’t working:
Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
Attach the Relay or Installer that came with your Omega Kit.
The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
If it’s a relay, keep it attached.
Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it. The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]
I still need help with this mesh/kit!
If your issue is Omega Related:
First, try The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
If your issue is NOT Omega Related, try the following:
BB Inworld Support Group: secondlife:///app/group/29801b0b-8011-c5a9-7c43-5ac187054946/about
Check the Creators Pics: secondlife:///app/agent/ab37697f-b1d3-46f7-b666-2ae2186948b5/about
Contact the Creator via Notecard: secondlife:///app/agent/ab37697f-b1d3-46f7-b666-2ae2186948b5/about
Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about
Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem.
Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.
If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.
WARNING: All information listed below is tentative/unofficial as the Mesh Listed is still in early access/beta. We offer no warren tee or guarantee that it will be released/updated or that this information will not change on full release. (Or that there will be a release at all)
Step One: Get an Update of your Genus Head. Step Two: Wear your Genus Head. Step Three: Attach the “Omega System Installer – Genus” Step Four: Click the installer, and verify each piece of the mesh thanks you in local.
It’s not working! T.T
Check out our handy troubleshooting tips:
Basic Trouble Shooting
Basic Trouble Shooting!
If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!
Things to Try when appliers aren’t working:
Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
Attach the Relay or Installer that came with your Omega Kit.
The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
If it’s a relay, keep it attached.
Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it. The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]
I still need help with this mesh/kit!
If your issue is Omega Related:
First, try The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
If your issue is NOT Omega Related, try the following:
Genus Inworld Support Group: secondlife:///app/group/b153906f-38dd-0dd6-d327-345bef9f446e/about
Contact Genus via Notecard: secondlife:///app/agent/65a4dec4-4950-4b90-b568-066eb8bb07fb/about
Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about
Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem.
Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.
If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.
Congratulations, you’re the owner of a mesh with a Pre-Installed Omega Kit.
That means there’s literally nothing you have to do to make it accept Omega and Tango appliers. It already does that.
It’s not working! T.T
Check out our handy troubleshooting tips:
Basic Trouble Shooting
Basic Trouble Shooting!
If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!
Things to Try when appliers aren’t working:
Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
Attach the Relay or Installer that came with your Omega Kit.
The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
If it’s a relay, keep it attached.
Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it. The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]
I still need help with this mesh/kit!
If your issue is Omega Related:
First, try The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
If your issue is NOT Omega Related, try the following:
A Ladies Secret Inworld Support Group: secondlife:///app/group/5465cb0c-6286-c8cb-0ae4-b6c8ec981494/about
Contact the Creator via Notecard: secondlife:///app/agent/cd508aca-6c1d-41d2-aa90-770c7053b33c/about
Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
The Omega Solutions Support Group: secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about
Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem.
Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.
If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.