Tag Archives: Female

Add-On: Caboodle Hoohoo Cover

Omega Add-On: Caboodle Hoohoo Cover

Do you have Maitreya? Would you like a bit less detail…ya know… down there?
This beautifully meshed hoo hoo cover created by the talented Caboodle will do it for ya!

The Details: 

  • What is it? A tiny bit of mesh that sits over your lady bits creating a smooth appearance. Handy when:
    • You want a more modest look.
    • You have a furred or scaled avi where it doesn’t make sense to have much detail there.
    • You want a male or androgynous avi.
  • Omega Add-on: This Mesh is distributed by Omega and Comes with Omega Built in!  No need to install anything!
  • Creator Info: This Mesh was created by Caboodle. Scripting, distribution, and support are all provided by Omega Solutions.
  • Permissions: Copy/Modify/No-Trans
  • Omega Advanced and Evolved Features:
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
    • Stand-Alone Materials: This kit DOES support Stand Alone Materials.
  • Clothing Layers:
    • None, fits UNDER the Maitreya clothing.
  • Mesh Type:  Fitmesh: This item is a fitmesh item and requires a fitmesh friendly viewer to view properly.
  • See what people are saying about it:

 

FAQ

Any cool add-ons I should know about?

For this mesh directly? No, but if you’re wearing Maitreya, you should check out all of these:
Empire has mesh nails for this mesh!
V-Tech makes a cool pectoral plate to turn this mesh into a male one ^.^

Is there a Demo?
Nope

Where can I get it?
https://marketplace.secondlife.com/p/Omega-System-Add-Ons-Caboodle-Hoo-Hoo-Cover/13932729

How Much is the Mesh? 
99L

It’s not working! T.T
Check out our handy troubleshooting tips:

Basic Trouble Shooting

Basic Trouble Shooting!

If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!

Things to Try when appliers aren’t working:

  1. Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
  2. Attach the Relay or Installer that came with your Omega Kit.
    1. The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
    2. If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
    3. If it’s a relay, keep it attached.
  3. Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
  4. Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
  5. Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
  6. Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it.  The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]

I still need help with this mesh/kit!

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
  • If you don’t find help there, contact our CSR: FreyasFashions Resident OR Fill out a Support Ticket

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.

OSK – Apricot Paws

Omega System Kit for Apricot Paws

The Details: 

  • Creator Info:
  • Plug-In: This mesh needs an easy to use Activator.
  • Permissions: Copy/Modify/No-Trans
  • Omega Advanced and Evolved Features:
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
    • Stand-Alone Materials: This kit DOES support Stand Alone Materials.
    • Asymmetrical Appliers: This kit DOES support Asymmetrical Arm Appliers.
  • Clothing Layers:
    • None
  • Hands and Feet:
  • Mesh Type:  Bento: This item works with the Bento update and requires a Bento friendly viewer to view properly.
  • See what people are saying about it:

Omega Kit Instructions:

 

Installation

Step One: Get an Update of your Apricot Paws.
Step Two: Wear your Apricot Paws..
Step Three:  Attach the “Omega System Installer – Apricot Paws”
Step Four: Click the installer, and verify each piece of the mesh thanks you in local.

Your mesh will now respond to Omega Appliers!

Next Steps

Thats it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System

FAQ

 

Is there a Demo?
Yes!
https://marketplace.secondlife.com/p/Apricot-Paws-Bento-Omega-Handy-Paws-DEMO/12444118

Where can I get it?
https://marketplace.secondlife.com/p/Apricot-Paws-Bento-Omega-Handy-Paws/12444117

How Much is the Mesh? 
397L

How Much is the Kit?
99L Inworld. (99-199 on MP)

It’s not working! T.T
Check out our handy troubleshooting tips:

Basic Trouble Shooting

Basic Trouble Shooting!

If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!

Things to Try when appliers aren’t working:

  1. Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
  2. Attach the Relay or Installer that came with your Omega Kit.
    1. The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
    2. If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
    3. If it’s a relay, keep it attached.
  3. Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
  4. Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
  5. Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
  6. Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it.  The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]

I still need help with this mesh/kit!

If your issue is Omega Related:

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
  • If you don’t find help there, contact our CSR: FreyasFashions Resident OR Fill out a Support Ticket

If your issue is NOT Omega Related, try the following:

  • Apricot Paws Inworld Support Group: secondlife:///app/group/1f6bd243-581b-35ba-10be-38542f208abf/about
  • Check the Creators Pics: secondlife:///app/agent/7586b777-14ab-4f84-b414-40b7944c49ba/about
  • Contact the Creator via Notecard:  secondlife:///app/agent7586b777-14ab-4f84-b414-40b7944c49ba/about
  • Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
  • The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.

OSK – DK Scripts

Omega System Kit for DK Scripts

The Details: 

Omega Kit Instructions:

Installation

Step One: Wear your Cutie Amputie Leg Stump.
Step Two:  Attach the “Omega System Installer – DK Scripts”
Step Three: Click the installer, and verify each piece of the mesh thanks you in local.

Your mesh will now respond to Omega Appliers!

Next Steps

Thats it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System

FAQ

 

Is there a Demo?
Yes!
https://marketplace.secondlife.com/p/DK-Cutie-Amputie-Leg-Stump-Mod-for-Lara-body-Demo/13659900

Where can I get it?
https://marketplace.secondlife.com/p/DK-Cutie-Amputie-Leg-Stump-Mod-for-Lara-body/13659889?

How Much is the Mesh? 
799L

How Much is the Kit?
99L Inworld. (99-199 on MP)

It’s not working! T.T
Check out our handy troubleshooting tips:

Basic Trouble Shooting

Basic Trouble Shooting!

If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!

Things to Try when appliers aren’t working:

  1. Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
  2. Attach the Relay or Installer that came with your Omega Kit.
    1. The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
    2. If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
    3. If it’s a relay, keep it attached.
  3. Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
  4. Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
  5. Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
  6. Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it.  The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]

I still need help with this mesh/kit!

If your issue is Omega Related:

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
  • If you don’t find help there, contact our CSR: FreyasFashions Resident OR Fill out a Support Ticket

If your issue is NOT Omega Related, try the following:

  • Contact DK Scripts via Notecard:  secondlife:///app/agent/02922139-22a8-4710-b319-58fc83354be5/about
  • Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
  • The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.

OSK – Catseye

Omega System Kit for Catseye

Catseye has made these cute Omega Friendly Furry Feet!

The Details: 

  • Creator Info:
  • Pre-Installed: This Mesh Comes with Omega Built in!
  • Permissions: Copy/Modify/No-Trans
  • Omega Advanced and Evolved Features:
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
    • Stand-Alone Materials: This kit DOES support Stand Alone Materials.
    • Asymmetrical Appliers: This kit DOES support Asymmetrical Arm Appliers.
    • RLV Support: This kit DOES have RLV Integration.
  • Clothing Layers:
    • Includes 1 Clothing Layer
  • Nails:
    • Claws are Omega Friendly
  • See what people are saying about it:

Omega Kit Instructions:

Installation

Congratulations, you’re the owner of a mesh with a Pre-Installed Omega Kit.
That means there’s literally nothing you have to do to make it accept Omega and Tango appliers. It already does that.
Next Steps

Thats it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System

FAQ

The Nails aren’t Working!
The nails work but bear in mind that as claws, there will be some warping.

Is there a Demo?
Yes!
https://marketplace.secondlife.com/p/Catseye-Dainty-Paws-Omega-Ready-DEMO/13484002

Where can I get it?
https://marketplace.secondlife.com/p/Catseye-Dainty-Paws-Omega-Ready/13484000

How Much is the Mesh? 
399L

How Much is the Kit?
The Kit comes built in!

It’s not working! T.T
Check out our handy troubleshooting tips:

Basic Trouble Shooting

Basic Trouble Shooting!

If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!

Things to Try when appliers aren’t working:

  1. Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
  2. Attach the Relay or Installer that came with your Omega Kit.
    1. The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
    2. If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
    3. If it’s a relay, keep it attached.
  3. Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
  4. Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
  5. Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
  6. Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it.  The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]

I still need help with this mesh/kit!

If your issue is Omega Related:

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about or Click Here
  • If you don’t find help there, contact our CSR: FreyasFashions Resident OR Fill out a Support Ticket

If your issue is NOT Omega Related, try the following:

  • Catseye Inworld Group: secondlife:///app/group/35eb5ca7-efbe-f946-a744-5eeb09f4d842/about
  • Contact Catty Catseye via Notecard:  secondlife:///app/agent/0cfc6313-083c-4a7e-bf2b-a802ceb08aab/about
  • Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
  • The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.

OSK – Utilizator Mode

Omega System Kit for Utilizator Mode

Utilizator Mode, long time creator of Anime meshes, has dipped their toes in the Human Market with this cute “Normie” head.

The Details: 

  • Creator Info:
  • Pre-Installed: This Mesh Comes with Omega Built in!
  • Permissions: Copy/Modify/No-Trans
  • Materials and Tinting
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
  • Head and Makeup Layers:
    • Type M Partial Head : Multiple Makeup Layers, split into 3+ texture zones
      • 3 Makeup Zones(s)
      • Makeup Layers are attached.
  • Mesh Type:  Bento: This item works with the Bento update and requires a Bento friendly viewer to view properly.
  • See what people are saying about it:

Omega Kit Instructions:

Installation
This mesh comes with Omega Built right in, so no need to do anything!

Next Steps
Now what? Getting Started with Omega: Huds, Shopping and Applier Conversion

Thats it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System

FAQ

Is there a Neck Blender?
There is no Neckblender for this Mesh. If you feel you need one, you can get one here:
https://marketplace.secondlife.com/p/OS-Omega-Neck-Fix/9437065

Does it come with Eyes?
There are no eyes for this mesh. If you need some omega friendly eyes, you can get some here:
https://marketplace.secondlife.com/p/Omega-Mesh-Eye-Kit/6277728

Is there a Demo?
Yes!
https://marketplace.secondlife.com/p/UTILIZATOR-Normie-Head-DEMO/13071630

Where can I get it?
https://marketplace.secondlife.com/p/UTILIZATOR-Normie-Head/13071631

How Much is the Mesh? 
500L

Where Can I get the Kit?
It comes built in!

I still need help with this mesh/kit!
If your issue is Omega Related:

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about
  • If you don’t find help there, contact our CSR: OR Fill out a Support Ticket

If your issue is NOT Omega Related, try the following:

  • Utilizator Inworld Group: secondlife:///app/group/bf27a78f-34c5-fe1b-7a76-3a0409041a55/about
  • Check the Creators Pics: secondlife:///app/agent/9579f5ee-9c98-42a6-af02-d0d77ee33a9b/about
  • Contact Utilizator via Notecard:  secondlife:///app/agent/9579f5ee-9c98-42a6-af02-d0d77ee33a9b/about
  • The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.