Tag Archives: nails

OSK – Murder of Ravens

Omega System Kit for Murder of Ravens

The Details: 

  • Creator Info:
  • Plug-In (Head  Only): This mesh needs a easy to use Activator.
  • Pre-Installed (Nails Only): This Mesh Comes with Omega Built in!
  • Permissions: Copy/Modify/No-Trans
  • Materials and Tinting
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
  • Head and Makeup Layers:
    • Type B Partial Head : Single Makeup Layer, split into 1-2 texture zones
      • 1 Full Makeup Layer(s)
      • 1 Makeup Zones(s)
      • Makeup Layers are attached.
      • Makeup Layers cover whole head.
  • Mesh Type (Nails):  Bento: This item works with the Bento update and requires a Bento-friendly viewer to view properly.
  • Mesh Type (Head):  Fitmesh: This item is a fitmesh item and requires a fitmesh friendly viewer to view properly.

Omega Kit Instructions (Nails):

Nails Installation:
These Come with Omega Built in! You don’t need to do anything!

The Nail Utility HUD:

  • The nail hud is set up to let you use a different applier on each nail if that is your desire.
  • By clicking each nail and/or bow on the hud, you can turn that nail’s listener on or off. When the nail/bow is green, it is listening for appliers, when it is black, appliers will not touch it.
  • You can turn entire groups of listeners on and off using the “All Fingers On”, “All Toes Off” and other options on the top of the hud.

Next Steps
Now what? Getting Started with Omega: Huds, Shopping and Applier Conversion

Omega Kit Instructions (Heads):

Head Installation:
Step One: Get an Update of your MOR Head.
Step Two: Wear your MOR Head.
Step Three:  Attach the “Omega System Installer – MOR”
Step Four: Click the installer, and verify each piece of the mesh thanks you in local.

Your mesh will now respond to Omega Appliers!

Makeup Appliers:

You can just use the Tattoo button to apply to the whole head… but who wants to do that? For instructions on how to use the Routing HUD for Mixing and matching your makeups, click here:

Omega System Makeup and Routing Info – Type B

Next Steps
Now what? Getting Started with Omega: Huds, Shopping and Applier Conversion

FAQ

Is there a Neck Blender?
There is no Neckblender for this Mesh. If you feel you need one, you can get one here:
https://marketplace.secondlife.com/p/OS-Omega-Neck-Fix/9437065

Is there a Demo?
no

Where can I get it?

How Much is the Mesh? 
Head: 0L
Nails: 250L

How Much is the Kit?
99L Inworld. (99-199 on MP)
(Remember, you don’t need the kit for the nails!)

OSK – eBody

Omega System Kit for Ebody

Note: This information is for Ebodys full price body ONLY.
Their Free body does not include Omega.

The Details: 

Omega Kit Instructions:

Part One: Using Omega Appliers

Congratulations, you’re the owner of a mesh with a Pre-Installed Omega Kit.
That means there’s literally nothing you have to do to make it accept Omega and Tango appliers. It already does that.

Next Steps

Now what? Getting Started with Omega: Huds, Shopping, and Applier Conversion
That’s it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System

Updates:
5/17/2015:  eBody swapped from a relay to a Pre-Installed Kit!
11/6/2017:  Curvey Version added. Omega Evolved Support Added.

FAQ

Is there a Neck Blender?
There is an Omega Friendly Neck Blender.

Any cool add-ons I should know about?
None yet. Have one to tell us about? Let us know!

Is there a Demo?
Yes! Inworld Only: http://maps.secondlife.com/secondlife/Coral%20Island/222/160/2002

Where can I get it?
https://marketplace.secondlife.com/p/ABAR-eBODY-CLASSIC-v84-BENTO-AVATAR/13193217
https://marketplace.secondlife.com/p/ABAR-eBODY-CURVY-v84-BENTO-AVATAR/13193218

How Much is the Mesh? 
2500L

How Much is the Kit?
It comes with the Kit built in!

It’s not working! T.T
Check out our handy troubleshooting tips:

Basic Trouble Shooting

Basic Trouble Shooting!

If you’re here, either you’re seeing this section embedded on an instructions page or you’ve been sent here because your Omega Isn’t working!

Things to Try when appliers aren’t working:

  1. Verify you’re on a sim that allows scripts. Easiest way: Toggle something on your Mesh HUD to see if it reacts.
  2. Attach the Relay or Installer that came with your Omega Kit.
    1. The Name of the Kit should match the Name of your Mesh. Ie, you should have a Maitreya Relay for Maitreya or a Logo Installer for Logo.
    2. If it’s an installer, click it and verify all your bits say “Thank you” in local chat. If it doesn’t say thank you, grab a redelivery of your mesh or open a new copy.
    3. If it’s a relay, keep it attached.
  3. Verify your mesh layers are turned ON. Mosts Body Meshes and some head meshes let you toggle your layers on and off. Sometimes, this will make it look like applier’s aren’t working. Take a moment to toggle them ALL off, and then back on.
  4. Check for Alpha-Glitch issues. Do this by turning all, or all but 1 of your body layers to Masking.
  5. Verify it’s not an applier issue. Take the applier to one of our inworld Mannequins and try it there. If it works, nothing is wrong with the applier. If it DOESN’T work, you may need to contact the applier creator.
  6. Verify you didn’t bork your Mesh. Many meshes now feature methods to remove their scripts. It helps with lag on RP sims. This does mean that occasionally a customer accidentally clicks on these buttons, ruining their ability to use appliers or their hud. To check, simply play with Mesh HUD to make sure the body is still reacting to it.  The easiest way is likely to play with the Alpha hud. If that works, you should be ok. If you DID bork your mesh, just grab a redelivery of your mesh or open a new copy.
[collapse]

I still need help with this mesh/kit!
If your issue is Omega Related:

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about
  • If you don’t find help there, contact our CSR: OR Fill out a Support Ticket

If your issue is NOT Omega Related, try the following:

  • ebody Inworld Group: secondlife:///app/group/9161acd0-c9cd-da44-61b0-4cd30b00624e/about
  • Contact eBody via Notecard:  secondlife:///app/agent/93e31461-6186-444e-9b0c-8095bdf0d45b/about
  • Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
  • The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.