Instructions – Vexilles

Omega System Kit for Vexilles

Important: This is a NON-Sluv Head. 
Only the Hairbase takes Omega Appliers!

The Details: 

  • Creator Info:
  • Plug-In: This mesh needs an easy to use Activator.
  • Permissions: Copy/N0-Modify/No-Trans
  • Materials and Tinting
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
  • Head and Makeup Layers:
    • Type B Partial Head: Single Makeup Layer, split into 1-2 texture zones
      • Only Has 1 Makeup Zone, the Hairbase Layer.
  • Mesh Type: Rigged: This item is a rigged mesh item. It will require a Mesh Friendly Viewer to view properly.

Omega Kit Instructions:

Installation

Step Two: Wear your Vexilles Hairbase.
Step Three:  Attach the “Omega System Installer – Vexilles”
Step Four: Click the installer, and verify each piece of the mesh thanks you in local.

Your Vexilles Hairbase will now respond to Omega Appliers!

Next Steps

That’s it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System

FAQ

Is there a Neck Blender?
There is no Neckblender for this Mesh. If you feel you need one, you can get one here:
https://marketplace.secondlife.com/p/Omega-Mesh-Eye-Kit/6277728

Does it come with Eyes?
There are no eyes for this mesh. If you need some omega friendly eyes, you can get some here:
https://marketplace.secondlife.com/p/OS-Omega-Neck-Fix/9437065

Is there a Demo?
No

Where can I get it?
https://marketplace.secondlife.com/p/Vexilles-Mesh-Head-1/11715075

How Much is the Mesh? 
2500L

How Much is the Kit?
99L on the MP. 50L Inworld WITH our Support Group Tag. (5L to join)

I still need help with this mesh/kit!
If your issue is Omega Related:

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about
  • If you don’t find help there, contact our CSR: OR Fill out a Support Ticket

If your issue is NOT Omega Related, try the following:

  • Contact Vexilles via Notecard: secondlife:///app/agent/71e850ee-f92d-4635-a145-0670faa8f734/about

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.

Omega Solutions Newsletter: March/April

Omega Solutions Newsletter:

March/April in Review

Huzza! Only Two Months in between this time!

Omega News

Neck Blenders for Men
First.. because there has been many.. many requests…I FINALLY got the Neck kit updated for men! It now includes 1 neck size and 3 neck blender options for menfolk.
http://slpoweredbyomega.com/instructions/instructions-omega-neck-stub/

Head Updates: In an attempt for a more intuitive design, I’m experimenting with a new method of Makeup Application. I’ve started updating select heads and kits to react to the “HUD” and “ALL” buttons by bringing up a popup for you to select where to apply a texture.  Theoretically, this should reduce the need to use the routing hud and help folks who just sorta blindly click. 🙂 (Since all buttons on the applier will either apply the texture in the default areas or bring up a popup!)

Full Perm Kit Changes:  Well.. it looks like Full Perm Heads are going to be more and more of a thing, so after talking with Customers, Creators and my Minions I’ve decided to make a change in the pricing Structure. Before, to reflect the Added work of keeping such a kit secure and providing Customer Service for it, I set the price at 299L for the Meli Imako Kit as well as the Safy Belle One.   I’ve decided to change this as to not punish end users. Instead there is now two kit editions for each of these products and future products like them.

  • The Creator Edition includes a transferable Plug-in script to be placed in the head before sale, instructions for naming, test appliers and anything else I think might be useful with a particular head. It is priced at 299L, only available inworld and only available after purchasing the “Customer Edition”
  • The Customer Edition includes an Installer and because I know some people won’t set the head up correctly before selling it…  a no-transfer “demo” version of the Plug-in Script along with instructions.   It won’t include any of the other tools and bits I decide to include with the Creator Edition. It will cost the normal 99L but will not have a Group Discount available.

Phat Azz Channel Updates: 

Well…. it took 2 years.. and giving up completely.. but I did it… I found CK Winx! (Rather he found me.. ) For those of you who aren’t 100yo in SL years, that’s the creator of Phat Azz, not the first mesh booty, but the one that really launched them into the mainstream. You can still find TONS of appliers for it on the MP and every booty had its’ own instructions for converting them!

And now, with CK’s help and permission, I’ve updated the Generic Router to convert allll those Phat Azz appliers into an Omega Ones.
https://marketplace.secondlife.com/p/Generic-Router-for-Omega-Heads-v21/7337832

Simply make sure you are wearing the router when you use the phat azz applier.  No more clunky Notecard swapping for phat azz (thank goodness).

And if you want to make a permanent applier for yourself instead, I’ve also updated the Applier Converters to listen for Phat Azz as well. 🙂
http://slpoweredbyomega.com/instructions/omega-advanced-applier-converter/

Continue reading »

Instructions – Angel Feet

Omega System Kit for Angel Feet

The Details: 

  • Creator Info:
  • Plug-In: This mesh needs an easy to use Activator.
  • Permissions: Copy/Modify/No-Trans
  • Materials and Tinting
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
  • Hands and Feet:
    • Type A Hands & Feet: Separated Toes, Physical Nails
    • No Clothing Layers
    • Has a Toggle-able Ankle Blender around the ankle that can be tinted, or can use Omega Neck Textures.
  • Mesh Type: Rigged/Unrigged: This Mesh includes both a Rigged and Unrigged Version. Both require a Mesh Friendly Viewer to view properly.

Omega Kit Instructions:

Installation

Step One: Get an Update of your Angel Feet.
Step Two: Wear your Angel Feet.
Step Three:  Attach the “Omega System Installer – Angel Feet”
Step Four: Click the installer, and verify each piece of the mesh thanks you in local.

Your mesh will now respond to Omega Appliers!

Next Steps

Thats it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System

FAQ:

Is there a Demo?
Yes!
https://marketplace.secondlife.com/p/Angel-Feet-Gift-Bag-Demo-MP/11727761

Where can I get it?
https://marketplace.secondlife.com/p/Mesh-Feet-FittedRigged-Angel-Feet/11727760

How Much is the Mesh? 
600L

How Much is the Kit?
99L on the MP. 50L Inworld WITH our Support Group Tag. (5L to join)

I still need help with this mesh/kit!
If your issue is Omega Related:

  • First, try The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about
  • If you don’t find help there, contact our CSR: OR Fill out a Support Ticket

If your issue is NOT Omega Related, try the following:

  • Official Support: Contact jkhu via IM/Notecard: secondlife:///app/agent/b91505f5-ed1f-43a5-b446-2181dbff9ac0/about
  • Unofficial Support: Mesh Body Addicts Group: secondlife:///app/group/830963e4-91fe-da74-003e-a4390de9a5cc/about
  • Unofficial Support: The Omega Solutions Support Group:  secondlife:///app/group/276e12ea-52c3-008f-d6c9-31fc8bd2ba73/about

Remember when asking for help in ANY support group to be polite and specific with your query. For best results, do not open with “hi” or “can someone help me?” but instead open with an explanation of the problem. 

Response rate varies based on who is online and what they know, so be patient. Sometimes you can get a delayed response, and sometimes there’s simply not someone online with an answer to your specific question. In this case, try one of the other support groups/options or come back later and try again when more or different people are around.

If you’re not sure if the problem is Omega, don’t stress, just try any of the above support options. If nothing else, they can help you sort out if it’s an Omega problem or something else.

Instructions – Safy Belle

Omega System Kit for Safy Belle

This slideshow requires JavaScript.

The Details: 

  • Creator Info:
  • Plug-In: This mesh needs an easy to use Activator.
  • Permissions: Copy/N0-Modify/No-Trans
    • Support for Full Perm version Coming Soon
  • Materials and Tinting
    • Materials: This kit DOES support Omega Material Appliers
    • Tinting: This kit DOES support Omega Tinting Appliers
  • Head and Makeup Layers:
    • Type A Partial Head : Single Makeup Layer, split into 3+ texture zones
      • 1 Full Makeup Layer(s)
      • 4 Makeup Zones(s)
      • Makeup Layers are attached.
      • Makeup Layers cover most of head.
      • Ears are not covered by Makeup Layers.
  • Mesh Type:  Bento: This item works with the Bento update and requires a Bento friendly viewer to view properly.

Omega Kit Instructions:

TOS for Creators (READ ME)

IMPORTANT: Read the TOS!

TOS for Omega Listener Scripts

In Purchasing and/or Distributing our scripts you agree to the following terms:
This is the TOS for the Safy Belle Plug-in Script. Also in effect is our Full TOS.
Breaches in this TOS will result in any scripts being shut down and/or DMCAs to be filed.
It is subject to change without notice.

Also note: We DO have the means to shut down our scripts remotely if we find someone in breach of TOS. 

  1. Scripts may not be distributed copy/Trans. They must be copy/no-trans.
  2. The scripts may not be distributed or sold alone and may only be distributed in the mesh for which it was originally created.
  3. The scripts may NOT be distributed in meshes other than the  Meshes for which this kit was created.
  4. The scripts may not be distributed in trans mesh. (and will not work while the mesh is trans)
  5. The scripts may only be distributed by the creator that purchased the script.
  6. These scripts may not be used to for IP infringement of any sort.
  7. The scripts may not be used in any product that violates Linden Labs TOS.
  8. Occasionally an update may be distributed to add new features or implement fixes. You are not required to use the updated script and can continue to use the old script if you prefer unless the update includes the fix for a security issue. In that case, you are not required to use the new script, but you must remove the old.

[collapse]
Instructions for Creators

Omega Script Setup Steps:

  1. Read the TOS
  2. Rez the Head, Makeup and Eyes
  3. Link the Head and Makeup Layer
  4. Put “HEAD” (without quotes) in the name of the skin layer.
  5. Put “MAKEUP” (without quotes) in the name of the makeup layer.
  6. Put “EYES_LAYER0R” and  “EYES_LAYER0L” (without quotes) in the names of the INNER eye layers.
  7. Link everything together with a root prim if it isn’t already.
  8. Change the mesh’s permissions to no-trans.
  9. Place the “Omega Plugin – Safe Belle” in the head.
  10. Make a No-Trans Copy to test. The script will not work so long as the Mesh it is in is Transferable. So to test it, you have two options.
    • Pass the head to an alt. (You will need to buy them a copy of the kit so they have an installer)
    • Make a copy of the head, then Find a copy/mod/no-trans prim and temporarily attach it to the copy and then remove it again. This will leave you with a no-trans copy of your head.
  11. Once you have a no-trans copy, click the included installer and wait for the Mesh to say “Thank you for Installing Omega!”. If it doesn’t say this.. something is wrong. Check the head permissions.
  12. Test it with the included Skin and Eye Applier. To test the makeup layer, use the Generic Routing HUD. 🙂

Promotion:

Once you’re set up, there’s some promotion related perks to make note of:

  • Special Omega Logo: To the right, you will find a special Omega Logo you may use to signify you’ve included the Omega Plugin script in your head. You may NOT use that logo or claim to be Omega Friendly or Omega Ready unless you’ve properly installed this script. Make sure it gets put on your ads so your customers know what kit to buy!
  • Ability to Advertise in the Flickr Groups:
    • Omega Gents – https://www.flickr.com/groups/2654212@N20/
    • Omega Ladies – https://www.flickr.com/groups/2693574@N23/
    • Omega Kiddies – https://www.flickr.com/groups/2693045@N23/
  • Ability to Advertise in Omega Obsessions: http://slpoweredbyomega.com/shopping-guide/omega-obsession-group/
  • Get Listed on this Page: If you let us know you’ve released a version of the head (and toss us a retail copy to verify), we’ll list you on this page for those looking for the best version. 🙂

 

Feedback:

Did we leave anything out? Is there anything useful we could have included? Leave a comment to let us know!

FAQ

Can I get a version of the script that doesn’t need the installer?

Sorry, we cannot provide Pre-Installed Scripting for this head. Sorry!

[collapse]
Customer Instructions

Installation

Step One: Wear your Safy Belle Bento Head.
Step Two:  Attach the “Omega System Installer – Safe Belle”
Step Three: Click the installer, and verify each piece of the mesh thanks you in local.

Your mesh will now respond to Omega Appliers!

Next Steps

Thats it, enjoy!
-Chellynne Bailey
Omega Solutions – Home of the Omega Applier System

Customer FAQ

I click the installer and nothing happened!
Make sure you give it a moment to process, and if it still doesn’t work, check the contents of the head to verify the creator included the Omega Plugin Script. If you don’t see the Omega Script in the head, continue to the Resellers Instructions. (And alert the reseller they aren’t set up right and you had to do it yourself. If they advertised the head as being Omega friendly, this is false advertising.)

[collapse]

FAQ

Is there a Neck Blender?
There is no Neck-blender for this Mesh. If you feel you need one, you can get one here:
https://marketplace.secondlife.com/p/OS-Omega-Neck-Fix/9437065

Is there a Demo?
Yes!
https://marketplace.secondlife.com/p/DEMO-Emily-Animated-Bento-Mesh-Head-16-Anim-6-Blink-Applier/11284438

Where can I get it?
http://maps.secondlife.com/secondlife/ZoHa%20Islands%20E/26/160/22

How Much is the Mesh? 
No-Trans: 2,490L
Full Perm:  6,990L
From Resellers: Varies

How much is the Kit?
The customer kit is 99L inworld or on the Marketplace. The creator kit, with the transferable plug-in script is available only inworld for 299L and requires the prior purchase of the 99L customer kit for a total cost of 398L.
(We could have just sold the transferable script for 399L, but wanted to make sure customers got the right product and didn’t accidently purchase the more expensive version)

Instructions – Master Implant Kit

WARNING: All information listed bellow is tentative/unofficial as the Mesh Listed as not been released/updated to Omega yet.
We offer no warren tee or guarantee that it will be released/updated or that this information will not change on release. (Or that there will be a release at all)

Master Implant Kit


Add Tango and Omega Applier Support to your implants and other torso-only meshes!

Purpose of this Kit

Features of Both Kits:

  • Standard Applier Support
  • Materials Applier Support
  • Tinting Applier Support
  • Support for 3 Clothing Layers
  • Mesh Hud with:
    • Layer Toggling
    • Layer Alpha Mode Toggling
    • Nipple Selection
    • Reapply Buttons
  • Fixes 32bit Skin Textures.

What is Included in the Creator Edition:

  • Copy/Trans Listeners for the Breasts themselves.
    • 2 Versions, 1 for SLUV Breasts, 1 for Tango UV Breasts
  • Copy/Trans Listeners for stand-alone nipples.
  • Copy/Mod/Trans Layer HUD and Scripting
    • HUD comes built for 3 Nipple options, but can support more then a dozen.
      (HUD will need to be modified/reskinned if you select a number of nipples other than 3)
  • A Vendor to Distribute the Installer for this kit.
  • A Fancy Logo for your Breasts!
  • Ability to advertise in Omega Obsessions and Omega Ladies Flickr!

What is Included in the Customer Edition:

  • Installer to activate your Mesh.
  • Copy/N0-Mod/No-Trans HUD.
  • A Copy/No-Mod/No-Trans Demo of the Creator Edition Scripts.
    (Fully functional, just no-trans)

Why you DO need this kit:

  • If you’ve created Mesh Breasts and:
    • You don’t want to script them yourself from scratch.
    • You want that third clothing layer support Omega Provides
  • If you’ve purchased Full Perm Mesh Breasts and want to Resell them with scripting!
  • You’ve purchased Modify Mesh Breasts and want to use them but:
    • They lack Tango Support
    • They lack Omega Support
    • They lack Materials Support
    • They’re too script heavy.
  • You’ve purchased a Mesh Implant or other Product with the Omega Implant Logo!

 

Why DON’T need this Kit:

  • You’ve purchased already scripted breasts and:
    • They already have Tango and/or Omega Support
    • They either HAVE materials support or you don’t care about it.
    • You like the scripting they already have.
  • You’ve created some breasts and want to script it yourself!
    • We DO have all the information about how to do your own Boobie Scripting Here
      • Note: We will provide Tango Channels ONLY to those who:
        • Can show me mostly finished breasts they’ve created. (No full perm resellers!)
        • Will agree to not share or use the channels inappropriately.
      • Also Note: You will not be able to utilize our tattoo layer and will have to come up with your own solution.

[collapse]
Consumer Instructions

If you’ve purchased a set of breasts with the Implant Kit Logo on it:

  • Wear the Implants
  • Wear the Included Installer
  • Click it, and it should tell you “Thank you for Installing Omega!”
    If it says thank you, you’re done. If it does NOT, then the mesh you’ve purchased is NOT set up and you will have to follow the Creator Instructions bellow.

[collapse]
Creator TOS

In addition to our Full TOS Here, Use of this kit is subject to the following:

  1. These Scripts may not be used to break the TOSs of Linden Labs, Omega or the Creator of the Mesh. This means if you are a reseller, make sure the creators TOS allows Omega Scripting Explicitly. If Omega is not mentioned in their TOS, ask the Creator Directly.
  2. These Scripts may not be used for IP infringement of any sort.
  3. All scripts must be set to No-Mod/No-trans before distribution.
  4. Listener scripts must be distributed IN a finished product, not by themselves.
  5. Products must be fully set up and tested before being Advertised as Omega Friendly. This means:
    1. You’ve configured the mesh by adding the keywords bellow
    2. You’ve inserted the listener scripts.
    3. You’ve provided a working HUD.
    4. You’ve tested it all to make sure it works properly
  6. The Included Logo must be prominently displayed on the product vendor and never displayed alone where it might be grabbed.
  7. The Included Logo must NOT be put on items that have not satisfied Line 5.

[collapse]
Basic Requirements and Limitations

  • First, your mesh will need to be a SLUV or TUV mesh.
  • This can include:
    • Implants
    • Chest Pieces
    • Nipples
    • Any mesh that repurposes upper body textures
  • It is NOT appropriate for anything with:
    • Legs
    • Hands
    • Feet
    • Heads
    • Eyes, Nails, Neckblenders, etc
  • The Scripts will not work in Transferable Mesh at any time. You will need to take steps to be able to test your creation while it is no-trans. (More info bellow)
  • This Kit requires the inserting of scripts and the editing of prim descriptions.
    • Unless you’ve purchased breasts already set up, you will need to modify permissions to make use of this kit.
    • This may interfere with other scripts that make use of the prim descriptions. This usually is not an issue since most commercial products rely on prim names rather than descriptions, but if for some reason you need a copy of the script that uses names instead of descriptions, let me know, I shall send you some.

[collapse]
Creator Instructions

Rez, Link and Configure your Breasts

First Step is to rez all the bits of your implants. You’re going to put the following keywords into the descriptions

  • skin
  • tatt
  • bra
  • top

For the nipples, it’s a little different. The script as built can support over a dozen nipples.
If for some odd reason you need more than that, feel free to IM me. I’ll figure something out.
So, place the following in the nipple descriptions:

  • nipple:1
  • nipple:2
  • nipple:3
  • etc….

If you desire a root prim, now is the time to add one.

Set the Permissions of the Scripts and Breasts

BEFORE adding the Omega Scripting change the permissions on it to no-trans. While you’re at it, you might as well set the permissions of the Breasts to no-trans as well. For the security of our Applier Creators, do note that NO Omega Script, this one included, will function while a mesh has Transfer Permissions.

Insert the appropriate Script

There are 3 Listener Scripts included, one for SLUV Implants, one for Tango UV Implants and one for Nipples.
If you’re unsure if your implants are SLUV or TUV, TUV means that your UV uses most of the Texture Space.  Your Breasts are roughly centered in the UV to match other Implants.   SLUV breasts, on the other hand, have the breast centered in the upper left corner of the UV map, to match mesh bodies and other SLUV meshes.

If you have the ability, I do recommend going with a TUV arrangement for better compatibility with older partial appliers.  While TUV breasts have no issues wearing SLUV textures,  going the other way can have some weird results if the repeats/offsets/rot used are not typical.  That said, I have programmed the SLUV script with corrections for the most common arrangements partial appliers use.

The Nipple Script is for Stand Alone Nipples only and does a simple Link_Set/All_sides texturing. If that is not good enough (ie, if there are piercings attached), use one of the breast scripts.

Testing the Listener Scripts

Now, none of the scripts work in a mesh that is transferable, ever. So how do you test your work? You have two options:

  1. Pass the now set up boobies to an alt and buy them a consumer kit to activate the scripts.
  2. Make a copy of the breasts and attach a random no-transferable prim to them. This will leave you with a set of your breasts that are no-transfer.

Either way, you will need to use the included installer named “Omega System Installer – Implant Kit”

 

 

 

Setting up the HUD

If your mesh has 3 or fewer nipples, you have the option of skipping this step and letting them use the HUD that comes with the Kit. However, if you provide more than 3 nipples you will need to add more buttons to the HUD.

First Step is to reskin the HUD to your liking.  There is a PSD Here
Next will be to add and subtract buttons for Nipple Selection.
Nipple Selection Buttons should be named “nipple” with a number in the description. Note: 0 is reserved for “no nipples”
Nipple Mode Buttons, if you have multiple are named “mode” with “nipple:4” , “nipple:5”, “nipple:6”, etc. Note, you only NEED one nipple mode button. It will affect all of the nips… I’m just weird and like tidy rows 🙂

Once you’re done, make sure you set the HUD no-trans and all it’s scripts to No-mod/no-trans.

More Info about the HUD

If you have the Creators Edition, All the scripts in the HUD are full perm. Since there’s no sensitive information getting passed through it, I saw no reason to restrict it to no-modify. This means you can add additional features to the scripts if you so desire, or take what you can gleen from them and make your own HUD for your mesh!

Also note, there is a Rotation Script in the HUD used for shrinking down the hud and opening it back up again. I left this open as well. If you change the prim configuration of the HUD you may have to adjust the rotations in the script. No, I cannot help you with this. 🙂

[collapse]